Tổng quan sản phẩm MÁY ĐO ĐỘ BỀN UỐN NHIỆT ĐỘ THẤP GESTER MODEL GT-KC10B

Máy Đo Độ Bền Uốn Nhiệt Độ Thấp (Low Temperature Bally Resistance Flexing Tester) Gester Model GT-KC10B

Application of GT-KC10B
Bally Resistance Flexing Tester is used to determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
Standards:

SATRA TM 55; IULTCS/IUP 20-1;
ISO 17694 ; EN 13512 ;
EN344-1 section 5.13.1.3 and annex C;
EN ISO 20344 section 6.6.2.8;
GB/T20991 section 6.6.2.8;
AS/NZS 2210.2 section 6.6.2.8;
JIS-K6545; BS 3144 Clause 13
Equipped with A type of upper grips.

ISO 32100 ; DIN53351;
GE-24;ASTM D 6182
EN ISO 20344-2020 section 6.6.3
Equipped with B type of upper grips.

Feature

Materials of outer chamber: 2mm Double-sided color coated steel with power coated surface.
Materials of inner chamber: using SUS304 stainless steel, seamless welded. Beside, the outer structure of the inner chamber is reinforced with 10mm steel plates to meet the structural strength requirements of the bending test.
Low Temperature Bally Resistance Flexing Tester With vacuum glass observation window, more effective to observe the testing situation.
Temperature control: adopt 7inch color touch screen with Chinese and English version, easy to operate.
Low Temperature Bally Resistance Flexing Tester Equipped with 2 sets of mechanical compressor, two-stage compression refrigeration cycle can quick cooling up to specified inner temperature in the case of various fixture group.
The flexing system has separate controller with function of power off memory and automatically stop when test done.
All the testing fixtures are made of SUS304 stainless steel or aluminum, have a good corrosion resistance and anti-rust property.

Principle
The test specimen is folded in half then one end is secured in a clamp. The test specimen is then turned inside out and the free end secured in a second clamp at 90 degrees to the first. The first clamp is repeatedly oscillated through a fixed angle at a defined rate causing the test specimen to flex. At set intervals the number of flexing cycles is recorded and the damage to the test specimen is visually assessed. The test can be carried out with wet or dry test specimens at ambient or sub-zero temperatures.
Hãy liên hệ với Vạn Năng Company ngay để được tư vấn chuyên sâu và nhận các ưu đãi hấp dẫn nhất thông qua hotline/zalo: 0903 991 335!

Công ty TNHH Thương Mại Dịch Vụ Thiết Bị Công Nghệ Vạn Năng

📍 Địa chỉ: 818 Trường Chinh, Phường Tân Sơn, Thành phố Hồ Chí Minh, Việt Nam

📞 SĐT – Zalo: 0903 991 335 (Ms. Hạnh – Giám Đốc Kinh Doanh)

✉️ Email: hienhanh@vannangvn.com